There shall be a minimum distance of 3 feet of unobstructed working space, measured from the meter face, in front of all electric and natural gas meters. We require a 3-foot minimum separation between natural gas and electric facilities.
How close can gas and electric meters be?
According to regulation, gas pipes and gas meter in domestic houses, must be spaced at least 150mm from electricity meters, switchboards, electric cables, sockets, telecommunication cables, consumer units and any other conductors.
Can gas and electric meters be in the same cupboard?
IET Forums – Gas and electric in same cupboard. You will not be allowed to do it (by the gas supplier). There are requirements for space and ventilation for gas meters. You don’t want a build up of gas from a small leak, in a confined space, even without electrical equipment in there.
How far should a gas pipe be from electric?
Gas service pipes must be at least 150mm from electricity meters, controls, electrical switches or sockets, distribution boards or consumer units and at least 25mm from electricity cables.
Where should my gas meter be located?
Where should my gas meter be located? There are regulations around the installation of your new meter which must be adhered to. But in general terms, the ideal location for a gas meter is on an external wall that’s no more than 2 meters from the corner of the property on either side of a door or sealed window.
How much clearance is required around a gas meter?
At least 3 feet, per NEC 110-26 & NFPA 54-National Fuel Gas Code for premises-owned gas meters. In at least some jurisdictions the National Fuel Gas Code excludes meters and other equipment used by the gas utility from includion within scope of the Code.
Can gas and electric lines cross?
Yes, electric wires can cross a gas line, or any other line for that matter. Care should be used when digging and you should ALWAYS call your underground utility marking service in your area.
Can a gas engineer move a gas meter?
It’s illegal for anyone but a qualified, licensed professional – such as a Gas Safe engineer – to change the meter’s position. This is due to health and safety reasons – for example, you’ll need to turn the gas supply off to avoid accidents.
Can you put a gas meter in a cupboard?
If the meter doesn’t have feet then it needs to be fixed in place, by either fixing the top bracket to the wall behind the meter or by use of a bottom bracket which should be screwed down, screwed down is acceptable when screwed to the bottom of the cupboard shelf.
How often should a gas pipe be clipped?
If its copper pipe and up to 15mm it should be clipped at least every 2 metres on a vertical run. 22mm and above should be clipped at least every 2.5 metres on a vertical run.
Can plumbing and electrical be in the same wall cavity?
Plumbing and electrical in the same wall cavity are fine, even if they do touch. Remember, all electrical is insulated. Bare ground wires are OK too. … You CANNOT use copper plumbing pipe for electrical building wiring.
How much does it cost to move a gas meter British gas?
To relocate a gas meter, costs range from an estimated £400 to £1,000, plus labour. For electricity meters, the starting price is lower – around £75, unless your electricity distributor is involved in the process.
Can I build a deck over my gas meter?
When a deck is built over a meter, it casts shade on the meter. … For the same reason, a deck should not be built over a meter in a cold climate (though some utilities may allow you to build a small shed roof over the meter to protect it from freezing snowmelt and falling snow and ice).
Can a gas meter be moved?
Only your current supplier can move your meter. This means if you want another supplier to do it you have to switch your supply to them first. This will change your prices for gas and electricity, so check that it’s worth it overall before you switch.