# Frequent question: How do you read an old electric meter?

Contents

To determine your correct meter reading, simply read the dials in order from right to left. As you read each dial, write down the number. In most cases, the pointer will be between two numbers on the dial. THE CORRECT NUMBER IS THE LOWER OF THE TWO, EXCEPT WHEN BETWEEN THE 0 AND 9, IN THAT CASE YOU WOULD READ THE 9.

## How do I read my old electricity meter UK?

1. Read the first 5 dials from left to right – ignore any red dials or dials marked 1/10.
2. If the pointer is between two numbers, write down the lower number – if it’s between 9 and 0, write down 9.
3. If the pointer is directly over a number, write down that number and underline it.

## What button do I press to get a meter reading?

1. press the left button – it might say ‘A’
2. write down the number from left to right.
3. ignore any zeroes at the beginning and any numbers after the decimal point if there is one.

## What is unit in electric meter reading?

If you use 1000 Watts or 1 Kilowatt of power for 1 hour then you consume 1 unit or 1 Kilowatt-Hour (kWh) of electricity. So the reading on the electricity meter represents the actual electricity used. … 100 x 10 = 1000 Watt-Hour = 1 Kilowatt-Hour (kWH) = 1 units (on your meter).

## How can I fix my electric bill?

How to Calculate Your Electric Bill

1. Multiply the device’s wattage by the number of hours the appliance is used per day.
2. Divide by 1000.
3. Multiply by your kWh rate.

You can read your own meters to help monitor your electric or gas energy use. During the heating season, your energy use should be compared to the number of heating degree days for the same time period; during the cooling season, compare your energy use to the number of cooling degree days.

## What does electric meter look like?

For most households, domestic electricity meters will look like a square shaped box on a wall often displaying 6 digits on an LCD display. They can vary in colour with more modern meters being white, with a plastic style face sometimes with a blinking red light on the front.

## Why is my meter reading so high?

High electricity bills may be due to an electricity meter that is incorrectly recording the amount of electricity you are using, but this is unusual. While there is no simple way you can test whether your meter is accurate, if you are concerned about your meter readings, contact your energy supplier.

IT IS IMPORTANT:  Best answer: How can you reduce the unwanted energy transfers from your home?

## What does R4 mean on electric meter?

The Normal day rate is R1 and the nighttime Low rate is R4.

## Where is an electric meter located?

Electric meters are typically placed on the siding at the rear or side of your home. Gas meters are typically located a few feet from the ground. If you have a digital meter and would like to read it yourself, simply write down the numbers that appear in the digital window.