How do you clean an electric fan motor?

To clean your fan, unplug it, remove the outer cover (for box fans and other handheld fans), apply a small amount of soap to a damp cloth, and wipe it thoroughly. You can also spray the fan cover with a hose once it’s removed – but not the blades unless you can remove them from the fan as well.

How do you clean an electric fan without opening it?

Best Methods of Cleaning a Fan Without Dissembling It

  1. Method #1: Blow it Out.
  2. Method #2: Use Sand or Salt for Cleaning Loose Dust. …
  3. Method #3: Use an Air Compressor. …
  4. Method #4: Using Cleaner. …
  5. Method #5: Using Air Compressor Can. …
  6. Method #6: Cleaning With A Household Vacuum Cleaner.

How do you take apart a fan to clean it?

How to clean a fan

  1. Remove the fan’s grill. …
  2. Fill a sink with warm, soapy water. …
  3. Unscrew the blade nut. …
  4. Pull the fan blade off, and put it into the soapy water.
  5. Loosen the nut that holds the rear grill to the motor stem. …
  6. Remove the rear grill. …
  7. Check the front of the motor for any dust.
IT IS IMPORTANT:  Can council houses have solar panels?

Can you use wd40 on a fan motor?

WD-40 can be used to clean the gunk out of a fan’s bearings, but it MUST be removed and replaced with a proper lubricant.

How do you clean the inside of an electric fan?

To clean your fan, unplug it, remove the outer cover (for box fans and other handheld fans), apply a small amount of soap to a damp cloth, and wipe it thoroughly.



  1. Turn your fan off and unplug it from the wall. …
  2. Remove the grate from your fan. …
  3. Vacuum the grate. …
  4. Wipe down the grate. …
  5. Wipe down your fan blades.

Can I clean a fan with water?

Clean fan housings with a damp cloth and an all-purpose cleaner, or a cloth dampened with a solution of water and mild detergent. Don’t let liquid get into the motor. Dirty fan blades don’t move air efficiently. When cleaning the blades, be careful not to bend them; bent blades may vibrate when the fan is operating.

Does cleaning a fan make it work better?

Practically, it hardly makes any difference in speed. However, it will make a difference in the throw of air as, after removing the dust, the front edge of the blade will become sharper. Why do ceiling fan moves more speed after cleaning the dust on its blades? This is more or less in THEORY.

What should you not use WD-40 on?

But Don’t Spray It On:

  • Door hinges. Sure, WD-40 will stop the squeaking, but it also attracts dust and dirt. …
  • Bike chains. WD-40 can cause dirt and dust to stick to a chain. …
  • Paintball guns. WD-40 can melt the seals in the guns.
  • Locks. …
  • iPods and iPads.
IT IS IMPORTANT:  Best answer: What is a source of energy give example?

Which oil is best for fan motor?

What Lubricant Should I Use For An Electric Fan Motor?

  • 3-in-1 SAE 20 Non-Detergent Lubricating Oil. …
  • Dupont Teflon Silicone Oil. …
  • Supco Zoom Spout Turbine Oil. …
  • Liberty Oil for Sewing Machines. …
  • Accel Non-Detergent SAE 20 Motor Oil. …
  • Liquid Bearings Synthetic Oil For Fans.

How do you fix a fan that won’t rotate?

Press the straw that came with your metal lubricant spray into the nozzle of the can. Shake the can several times and then put the end of the straw into the center of the fan blade unit and spray the lubricant several times. Rotate the fan by hand and do this again.

Energy sources