How do you remove a plastic junction box from a wall?
Cut a hole around the box with a drywall saw if it isn’t a remodeling box. Make the hole dimensions 2 or more inches bigger than the box so you can access the nails holding the box to the wall. Pull out the nails with a pry bar or pliers and remove the box.
How do you remove plastic electrical box?
Remove the old box and enlarge the opening
Cut the old box loose. To remove the old small gang box, pry it away from the stud slightly to expose the nail shafts and cut them with a hacksaw. Then work the wires through the box as you pull it free of the hole.
How do I remove an electrical junction box?
Reach inside the wall or ceiling and grab the box. Carefully pull the metal junction box through the opening in the wallboard, pulling the wires with it. When you can access the wires on the exterior of the box, pull them from the box and bend them around the wallboard, so they don’t fall back into the wall.
How do you remove an electrical outlet permanently?
- Flip the circuit breaker off.
- Unscrew the hots, neutrals, and ground from the outlet and remove the outlet.
- Splice the hot, neutral, and ground from both sides (charge and load) and put wire nuts on.
- Cover the box with a junction box lid.
- Flip the circuit back on.
How do you fix a sticky electrical box?
For an electrical box that protrudes slightly, covering switches with a deep switch plate can correct the problem. These covers have added depth. The edge bevel is twice as deep as on a standard plate. Deep plates sit 5/16″ off the wall.
Can a plastic junction box hold a ceiling fan?
Nor is the plastic rough-in box holding a moderately heavy fixture suitable for a ceiling fan. The problem with plastic boxes is that they can crack when subjected to the intense vibrations from a fan. A cracked box could eventually break and the fan could fall, creating a catastrophe.
How do you know if a ceiling box can support a fan?
The manufacturer must have marked the outlet box system to indicate that it is acceptable for ceiling fan installations. If the original box is not listed for this purpose, it must be retrofitted and attached securely to the building structure.