Frequent question: Why does my electric fence alarm keeps going off?

There can be many faults that cause an alarm condition, if you can’t see any obstructions on the fence like a broken or snapped wire, twisted wires, loose HT cables or fence wires unclipped from insulators and touching your steel bracket it may be an energiser fault.

What can trigger an electric fence alarm?

When an intruder either touches a live wire or cuts any wire on a Peri Secure electric fence , this will result in the alarm triggering. Electric fencing not only offers effective protection for your property but it is also a psychological & physical deterrent.

How do you turn off an electric fence alarm?

RESETTING THE ALARM: Switch the unit off with the Nemtek tab or remote key-switch. This will silence the siren (if it has not already timed-out), internal buzzer and will switch the strobe off. One of the alarm lights will be flashing or will remain lit to indicate the source of the alarm.

How do I reset my electric fence alarm?

RESETTING THE ALARM: Switch the unit off with the Nemtek tab or remote key-switch. This will silence the siren (if it has not already timed-out), internal buzzer and will switch the strobe off. One of the alarm lights will be flashing or will remain lit to indicate the source of the alarm.

IT IS IMPORTANT:  How much are LG solar panels?

How do you test an electric fence alarm?

Testing the Electric Fence Alarm



To test, we touch the earth and live wires together. Then you’ll see the alarm condition going off and so we know the energizer’s alarm is functioning properly. Let’s switch it off and if we switch it on again you’ll see it works properly. See other videos on Electric Fences.

How effective are electric fences?

Many people think an invisible underground wireless electric fence is the best way to keep their dog in their yard. However, they are simply not as effective as you might think. Statistics suggest that invisible wireless electric fences are only about 70% effective.

Can you get over an electric fence?

From a professional perspective it is fairly easy to climb over an electric fence whether it is on or off. Try climbing a wall with both electric fencing and Rola spikes??

How do you bypass a fence alarm?

BYPASS THE FENCE ALARM



Enter your PIN and push the * key, enter the digit ‘1’, then push the # key. The control panel will beep 3 times and the FENCE ALARM light will start flashing slowly to confirm the fence alarm is bypassed. To cancel the bypass, repeat the same sequence of keys.

Why is my electric fence box beeping?

If your Invisible Fence control panel is beeping every second, the most likely issue is that you have a wire break somewhere on your property. … If your Invisible Fence control panel is beeping with a lengthy pause between each beep, it’s possible your backup battery unit needs to be replaced.

IT IS IMPORTANT:  Question: Can sea water be used to produce electricity?

How does an electric fence alarm work?

Electric fences are designed to create an electrical circuit when touched by a person. … The fence will go to alarm if: The fence is earthed for 3 pulses/seconds (shocks someone/something) OR if a live wire and an earth wire make contact for more than 3 seconds OR of a live wire is cut. The siren would then sound.

How do I reset my Merlin electric fence?

After the ALARM light stops flashing, enter your PIN and push the # key to clear the alarm memory. Enter your PIN and push the * key, enter the digit ‘3’, then push# key. The control panel will beep three times to confirm the fence is in low voltage mode.

How do you reset a Merlin Energizer?

To load factory default settings: Unplug the energizer from the mains and disconnect one of the battery terminals. Reconnect the battery terminal and apply mains to the energizer. Within 65 seconds of reconnecting the battery terminal, the key sequence 2 3 8 9 # must be entered on the keypad.

Energy sources